eSun eTPU-95A
eSun eTPU-95A
A filament with high hardness, good resilience and excellent elasticity means that this filament can be used for insoles and other applications.
-High flexibility
-High impact resistance
-High toughness
1 in stock
Couldn't load pickup availability
Share
Example Application areas
Printed models
Product Details
Parameter Information
| Filament Properties Table | |
| 3D PRINTING FILAMENT | eTPU-95A |
| Density (g/cm3) | 1.21 |
| Heat Distortion Temperature (℃, 0.45 MPa) | / |
| Melt Flow Index (g/10 min) | 1.2(190℃/2.16kg) |
| Tensile strength (MPa) | 35 |
| Elongation at break (%) | ≥800 |
| Flexural Strength (Mpa) | / |
| Flexural Modulus (MPa) | / |
| IZOD Impact strength (kJ/㎡) | / |
| Abrasion resistance | 9/10 |
| Printing | 6/10 |
| Recommended print parameters | |
| Extruder temperature (℃) | 200 – 250℃ Recommended temperature 240℃ |
| Bed temperature (℃) | 45 – 60°C |
| Fan speed | 100% |
| Print speed | 20 – 50mm/s |
| Heated bed | Voluntarily |
| Recommended building surfaces | PVP glue, PEI, Printer's supplied mat |
| Functions | |
| Flexible | √ |
| Elastic | √ |
| Shock resistant | √ |
| Soft | √ |
| Composite | —— |
| UV resistant | —— |
| Water resistant | —— |
| Dissoluble | —— |
| Heat resistant | —— |
| Chemically resistant | —— |
| Fatigue resistant | √ |
| Needs drying | —— |
| Heated bed required | —— |
| Printing recommendation | Dry 55℃/>4h, Direct drive extruder recommended, print slowly |
Notes
-
It is recommended to dry the print (55℃/＞4H) to achieve the best printing effect. It is recommended to use it with eBOX drying boxes when printing.
-
It is recommended to use a Direct Drive Extruder.
-
The nozzle may have residual material after printing for a long time. It is recommended to use the cleaning filament. If necessary, replace the nozzle with a new one.
Storage
How to store filament:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect the printer nozzle.
2. To extend the life of your filaments, put the release filament back into the original vacuum bag and store it in a cool, dry place after printing.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament roll to avoid winding, so that it will feed properly the next time you use it.