Anycubic Wash & Cure 3.0

Anycubic Wash & Cure 3.0

Larger size for upgraded capacity

Compared to Anycubic Wash & Cure 2.0, Anycubic Wash & Cure 3 has an impressive 100% increase in the capacity of the cleaning basket, now at 3 liters. The total volume of the cleaning bucket has been increased to 4 litres. This makes it perfectly suited for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The curing size has increased by 15%, up to 160 x 180 millimeters, to accommodate larger and more models for a single finishing session.

Localized reinforcement, uniform hardening

The "innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a radiation range of 1-3 cm, significantly enhancing the curing effect on subtle areas such as the top of models and the hem of garments.

With a completely new arrangement of light beads and lens light source, Anycubic Wash & Cure 3's curing uniformity has been improved by 20% compared to its predecessor 2.0. This results in a more thorough and comprehensive hardening of the entire model.

Double layer design, IPA saving

The double-layer PP material cleaning basket is designed to support simultaneous cleaning with the platform. It has two adjustable heights of 100 mm and 165 mm, providing flexibility for printing platforms from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage.

Simple operation, quiet and efficient

Dual modes for cleaning and curing, easily selected with one click; the curing mode with enhanced gooseneck light can be easily turned on and off with a click. Infinite rotary control, adjustable from 1 to 30 minutes as desired.

Through a tighter construction and optimization of the software, noise disturbances during cleaning and curing are reduced[1], creating a quieter and more comfortable working environment.

In the packaging