eSun ePLA-Matte
eSun ePLA-Matte
Get a matte surface on the prints. Modified filament from PLA to keep the typical properties but is stronger with PC-like strength
-Low density
-Excellent prints
-Matte finish
17 in stock
Couldn't load pickup availability
Share
Example Application areas
Printed models
Product Details
Parameter Information
| Filament Properties Table | |
| 3D PRINTING FILAMENT | ePLA Math |
| Density (g/cm3) | 1.174 |
| Heat Distortion Temperature (℃, 0.45 MPa) | 51 |
| Melt Flow Index (g/10 min) | 2.1（190℃/2.16kg） |
| Tensile strength (MPa) | 34.56 |
| Elongation at break (%) | 56.1 |
| Flexural Strength (Mpa) | 41.21 |
| Flexural Modulus (MPa) | 1119.41 |
| IZOD Impact strength (kJ/㎡) | 33.15 |
| Abrasion resistance | 4/10 |
| Printing | 9/10 |
| Recommended print parameters | |
| Extruder temperature (℃) | 190 – 230℃ Recommended temperature 215℃ |
| Bed temperature (℃) | 45 – 60°C |
| Fan speed | 100% |
| Print speed | 40 – 100mm/s |
| Heated bed | Voluntarily |
| Recommended building surfaces | PVP glue, PEI, Printer's supplied mat |
| Functions | |
| Flexible | —— |
| Elastic | —— |
| Shock resistant | —— |
| Soft | —— |
| Composite | —— |
| UV resistant | —— |
| Water resistant | —— |
| Dissoluble | —— |
| Heat resistant | —— |
| Chemically resistant | —— |
| Fatigue resistant | —— |
| Needs drying | —— |
| Heated bed required | —— |
| Printing recommendation | —— |
Notes
ePLA-Matte filament is softer than other filaments, ease the tension on the extruder drive wheel if it would affect the print
Storage
How to store filament:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect the printer nozzle.
2. To extend the life of your filaments, put the release filament back into the original vacuum bag and store it in a cool, dry place after printing.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament roll to avoid winding, so that it will feed properly the next time you use it.