Anycubic Wash & Cure 3 PLUS
Size upgrade, increased capacity
Compared with Anycubic Wash & Cure Plus, the washing volume of the washing basket has increased by about 13.4% to 7.6 liters, and the total volume of the washing bucket is 12 liters, which is suitable for light-curing 3D printers of 10.6 inches and below.
At the same time, the curing size has increased by 42%, up to φ220*260 millimeters, to accommodate larger and more models for a single finishing session.
Total hardening and partial strengthening
The innovative design of Flexicure gooseneck lamps increases the energy value by 30,000uW/cm²* in the radiation area 1~3cm, which greatly improves the curing effect on details such as the top of the model and the figure's skirt.
Anycubic Wash & Cure 3 Plus has a completely new arrangement of lamellar beads combined with a lens light source. Compared to the previous generation Anycubic Wash & Cure Plus, it provides a 20 percent improvement in curing uniformity*. This results in a more thorough and extensive overall hardening of the model, ensuring better quality and consistency.
Double layer design, IPA saving
The double-layer PP material cleaning basket supports platform washing. It is equipped with two adjustable heights of 150 millimeters and 250 millimeters, which allows printing platforms from 6.6 to 10.6 inches and maximizes the efficiency of alcohol use.
A completely new dual-layer curing platform has been introduced, which increases the number of models cured per cycle and greatly improves curing efficiency.
Simple operation, quiet and efficient
Cleaning and curing in two modes, easy to choose with one click; the curing mode with enhanced gooseneck light can be easily turned on and off with a click. The cleaning and curing time can be easily adjusted from 1 to 30 minutes.
Through a tighter construction and optimization of the software, noise disturbances during cleaning and curing are reduced[1], creating a quieter and more comfortable working environment.
In the packaging
