Cleans easily with water
Unlike most other 3D printing resins, Copymaster3D's water washable UV resin requires no chemicals to remove uncured material from the finished 3D print. Simply rinse it in regular tap water and it will come out clean and ready for hair removal. This method is cleaner and less harmful to you and the environment. This should be the choice for every day resin 3D printing.
Fantastic color and finish
All of Copymaster3D's UV resins have consistent pigmentation throughout, meaning you get stunning parts that have a silky matte finish with a monochrome look that will be smooth to the touch and pleasing to the eye
.
Versatile, high quality resins
Copymaster3D's UV Resin range is suitable for most Resin 3D printers that use the 395-405nm wavelength as their light source. Printers in this range include:
Zortrax, Anycubic, Creality 3D, Phrozen, Uniz, Photocentric and many more.
The resins are also suitable for use on RGB and Monochrome LCDs so whether you have the Original Photon or the latest Mono X 6K for example, it will work on both meaning the usage applications are incredibly versatile.
Hardening
Copymaster3D Resins is a high quality resin made from the best materials. This is also evident in the curing process. Your finished 3D prints cure perfectly in sunlight or in a UV curing chamber. When curing is complete, the result is a rock-hard 3D print with very little material shrinkage.
The curing time below should only be seen as a guideline:
In a UV light curing chamber, it takes about 2-5 minutes
In sunlight 10-20 minutes
In daylight on a cloudy day it can take up to 60 minutes
Notes
- For good printing results, a temperature of the resin between 25-30 degrees is recommended
- Shake well before use. Avoid direct sunlight during use.
- Store the resin bottle in the dark and sealed at room temperature
- It is recommended to store resin between 15 – 35 degrees in its original packaging
- Avoid dusty and damp environments
Important information
Safety data sheet
ENG
- Keep out of the reach of children. Must not be consumed.
- ALWAYS use gloves and avoid direct contact with skin.
- Use in a well-ventilated area
- In case of contact with skin, rinse immediately with copious amounts of water. Seek medical attention if necessary.
- Finished prints need to be washed
