Flexplate-Powder Coated PEI 310 X 320MM

PrimaCreator FlexPlate-Powder Coated PEI

The new powder-coated FlexPlate from PrimaCreator consists of three parts. The first is the magnetic surface that you will attach to the printer bed. The second and third parts are the high quality spring steel plate covered with a plate of the best PEI Ultem.

Flexplate-Powder Coated PEI is the perfect surface to print on, it is very durable and easy to handle. And best of all, thanks to the flexible plate, your prints will be very easy to remove. Just give it a slight bend and the pressure will drop right off.

PrimaCreator FlexPlate-Powder Coated PEI is based on a ferrite core that is much more heat resistant than neodymium magnets.

This FlexPlate can withstand temperatures up to 130 °C without problems, so you can even use it with ABS.

PEI Ultem (Polyetherimide) from PrimaCreator is a reusable, relatively maintenance free build surface for both ABS (with a heated bed) and PLA (hot or cold), other materials such as metal, wood, PETG, ABS+ and many others also work great. You do not need additional adhesives such as glue or tape. PEI is attractive because it is "no-surface-prep", which makes it convenient to work with. In addition, printing on PEI does not require support floats as the parts adhere directly to the surface without problems.

Use.

Unpack the FlexPlate, attach the magnetic surface to the writing bed, then attach the spring steel plate with PEI to it on the magnetic surface. Remove the protective film from the PEI and re-set the print bed before printing. You are now ready to print. When the print is finished, just let the plate cool, remove the plate and give it a slight bend. You can then just "pop" the model off the plate. If necessary, it is recommended to use acetone, isopropyl alcohol, methyl alcohol or soap to clean your PEI after use. This will help increase your adhesion to the surface significantly.