PLA+ is an environmentally friendly material, which is easy to print and with smooth prints.
Good strength, stiffness, toughness balance, impact resistant, very suitable for printing functional parts.
Can be used for conceptual models, prototyping.
Example Application areas
- Decorations
- Sculptures
-Functional parts
-Cosplay
Printed models
Product Details
Parameter Information
| Filament Properties Table
|
|
| 3D PRINTING FILAMENT |
PLA+ |
| Density (g/cm3) |
1.23 |
| Heat Distortion Temperature (℃, 0.45 MPa) |
53 |
| Melt Flow Index (g/10 min) |
5（190℃/2.16kg） |
| Tensile strength (MPa) |
63 |
| Elongation at break (%) |
20 |
| Flexural Strength (Mpa) |
74 |
| Flexural Modulus (MPa) |
1973 |
| IZOD Impact strength (kJ/㎡) |
—— |
| Abrasion resistance |
4/10 |
| Printing |
9/10 |
| Recommended print parameters |
|
| Extruder temperature (℃) |
210-230℃ Recommended temperature: 215℃ |
| Bed temperature (℃) |
45 – 60°C |
| Fan speed |
100% |
| Print speed |
40 – 100mm/s |
| Heated bed |
Optionally |
| Recommended building surfaces |
Blue tape, PVP glue, PEI, Printer's supplied mat |
| Functions
|
|
| Flexible |
—— |
| Elastic |
—— |
| Shock resistant |
√ |
| Soft |
—— |
| Composite |
—— |
| UV resistant |
—— |
| Water resistant |
—— |
| Dissoluble |
—— |
| Heat resistant |
—— |
| Chemically resistant |
—— |
| Fatigue resistant |
—— |
| Needs drying |
—— |
| Heated bed required |
—— |
| Printing recommendation |
—— |
Notes
For more information contact us
Storage
How to store the filament:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect the printer nozzle.
2. To extend the life of your filaments, put the release filament back into the original vacuum bag and store it in a cool, dry place after printing.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament roll to avoid winding, so that it will feed properly the next time you use it.
