PrimaCreator Value UV and DLP resin that can be washed with water
PrimaCreator Value UV/DLP resin that can be washed with water allows you to create high quality 3D prints. Create 3D prints with delicate structures, fine details and wonderful surfaces. Use this resin on your UV LED & DLP 3D printer in a wavelength range of 395-405 nanometers.
Material properties PrimaCreator Value Water-washable UV/DLP resin:
- Use on your UV LED and DLP 3D printers
- Optimized for processing in the wavelength range 395-405 Nm.
- Fine details and perfect surfaces on the hardened 3D prints
- Minimized odor from the material
- Can be washed in water, no IPA needed
- Fast curing time: 4-8 seconds per layer for faster 3D printing.
Simply clean the 3D printed resin with water
Unlike most other 3D printing resins, PrimaCreator's water-washable resin requires no chemicals to remove uncured material from the finished 3D print. Simply rinse it in plain tap water and it will come out clean and ready to cure. This approach is the best choice for you and the environment.
Powerful 3D printing in color and attractive transparent parts
The finished and cleaned 3D print is a monochrome part with a beautiful semi-matte finish with excellent detail and smooth layer transitions.
If you choose the transparent resin, you get a transparent print that looks amazing.
- The most noticeable thing is that it doesn't smell very strong.
Resin for 3D printing on many DLP 3D printers
VALUE Resin is designed to work well on low power DLP-3D printers such as Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that use UV light for curing.
High quality resin for 3D printers and perfect curing
3D printer resin from the VALUE series is a high-quality resin made from the best materials. This is also evident in the curing process. Your finished 3D prints cure perfectly in sunlight or in a UV curing chamber. When curing is complete, the result is a rock-hard 3D print with very little material shrinkage.
Depending on the design of the 3D print, curing times may vary:
- In a UV light curing chamber, it takes approximately 2-5 minutes.
- In sunlight 10-20 minutes
- In daylight on a cloudy day, it can take up to 60 minutes.
Notes
- For good printing results, a temperature of the resin between 25-30 degrees is recommended
- Shake well before use. Avoid direct sunlight during use.
- Store the resin bottle in the dark and sealed at room temperature
- It is recommended to store resin between 15 – 35 degrees in its original packaging
- Avoid dusty and damp environments
Important information
Safety data sheet
SV
ENG
- Keep out of the reach of children. Must not be consumed.
- ALWAYS use gloves and avoid direct contact with skin.
- Use in a well-ventilated area
- In case of contact with skin, rinse immediately with copious amounts of water. Seek medical attention if necessary.
- Finished prints need to be washed
